MG Wing Gundam Zero Custom Part 6

started to put the armors on....

to put the armors.....the parts of the frame is detached..

begin with the bottom....the leg armos....all white....

the armor-equipped leg...really accurate to basic Gundam design..

the articulation of the leg is not affected by the armors...

armors for the hip....the armors were merely skirts armors only...it is weird that the side and back armors has different parts of the same colour...perhaps Bandai wanted the armor to be more thick..

the completed hip...

moving on with the torso...the machine cannon is also included as armor(?)

fully armed torso..

the cockpit hatch...the hatch is a bit hard to be pulled out..

the head..armors are the v-fin and the ears(?)

the finished head...the rectangular space on the ears is detailed up using silver marker..

armors for the arm....

the frame is now is completely armored...notice that the palms is dark-gray,not the real white palms....the white palms have some loose thumb so it can't grab the buster rifles right so i changed it with the extra ver.Ka palms which are more tight..

the parts that i had waited long to assembled...the wings...Wing Gundam Zero trademark..the mechanisms of this MG is focused on the wings with the simultaneous opening of the side pieces of the large wings..

the back wings...the mechanisms is likely the same with MG Sinanju for the 'sliding out' gimmick of the inner piece of the wings..

the assembled wing...very large in size...they are absolutely white....

the backpack....consists of the arms of the wings..

complete with the backpack...now will assemble everything up...

the 100% assembled MG Wing Gundam Zero Custom!!
could not believe that i took until six part to assemble it...(^o^)

the plus thing in this MG...a display stand....consist of four parts..

the completed stand...the pole can be adjusted to two different positions...

ready for action!!!

reviews of MG Wing Gundam Zero coming up next.....

MG Wing Gundam Zero Custom Part 5

Going on with the weaponries!!!

starting with the (twin) buster rifle...

parts for the buster rifle...actually the hose for the rifle is missing in the picture..(were doing something with the hose)

this is what is done with the hose....the hose is painted with the silver marker(again!)

the product!!almost at the length of the kit's frame itself..

close-up on the work done with the hose...it's a satisfactory!!

the twin(?) of the rifle is also assembled...they can be combined but i think i will show the 'gattai' in future post..

the parts for the machine cannon...don't really like the name actually..prefer to call it gatling gun or vulcan gun anyway..

the tip of the cannon is also painted with the silver marker(again!!) to produce metal effect..

the completed machine cannon(sigh)..

there are two of them...placed besides the head on the torso..it can be opened and closed....really like the metallic effect.(^~^)

the beam sabers....consists of the handle and the beam part...long and sleek in design..the beam is made in standard MG design...sharp tip and slightly curve..

finished with the weapons..will move to attaching armors to the frame!!

MG Wing Gundam Zero Custom Part 4

Biology form 5 chapter :locomotion and support
(What the h**k?I thought i'm assembling gunpla?)

Leaving only the arm parts to be assembled to complete the building of the frame

parts for the arm....too bad that Bandai did not produce the frame for the lower part of the arm..the palm is molded in white colour..

Finished arm...the shoulder,too, has frame..

as i'm building the frame..so i will use the dark palm(excess part in this kit..originates from Wing Gundam ver.ka) as it will produce a more 'frame-look'..

however..it was then i realized that the polycap for the palm is not held well and it requires extra support from some pieces including that blue armor part..(geez,actually i do not really want to use any blue part for the frame,but i thnk this time it can't be helped...sigh)

here's how it looks...the lower arm is almost complete

the completed frame...the frame is quite balanced in terms of the size of the parts..

degree of articulations of the frame...wonder if the armors will (a little bit) affect this almost 'perfect' articulations...however...I still could not figure out the function of the sliding piece at the back of lower leg..

looks!he's doing some exercise!!the double-ball piece connecting the hip and the torso did give the frame good articulations..

it also bends forwards...

and a little bit backwards...quite satisfying for me!!

monster!!!yameroo!!kaiju!!hiaahh,ULTRA BEAM!!!!!!

putting a try on Usain Bolt Winning(trademark) poses..he did it really well (^_^)

degree of articulation of the fingers..the thumbs are ball-jointed but the rest are hinge-jointed...however..the index finger is free from the other 3 fingers(still considering this design as flaw)

practising some pose with his beam saber....sure he's gonna looks much much better with the armors on!!

next: weaponry and armaments..

MG Wing Gundam Zero Custom Part 3

Still in the middle of building Wing Gundam...instead of continuing with the frame of the arms,I will go on with detailing and enhancing the frame..

Tadaa!!a silver marker...using this,the details on the frame can give a new look.

example of usage of silver marker...

close-up...

the round hole is also painted using silver marker..this method will work the best on MG kit from the Clear Part Campaign since some armors are made of clear plastic so frame's details can be shown off..

another thing done is on the clear piece at the torso..the interior wall is painted using green highlighter..this will make it to be in clear green colour..

this is how it will look alike....

it sure looks much much better that just only with the foil sticker..could see Heero inside the cockpit...(^o^)


done with the detailing......